Pneumatic Bucket Lifter
The Pneumatic Bucket Lifter is designed to safely and efficiently lift GRC mixes that are too heavy to lift by hand.
Once the mix has been produced the mixing bucket is raised slightly and it is pulled to the area of the factory where the mix is required. A locking safety arm ensures that the bucket remains stable during moving.
Once at the required location, the bucket is raised by the pneumatic cylinder. The locking mechanism is disengaged and the mix is poured either into the spray station or for premix directly into the mould.
The empty mixing bucket is then returned to the mixing station. While the mix is taking place the air cylinder is refilled via a quick release coupling.
Product Features
- Weight: 200kg
- Dimensions: 1400mm wide x 855mm deep x 1700mm high (min.), 2400mm high (max.)
- Dimensions of Platform: 620mm wide x 335mm deep
- Maximum Lift Height: 110cm
- Mixing Vessel Capacity: 125kg
- Air Requirement: 5.0L per lift at 7bar (100psi)
- Powerful pneumatic ram with a capacity of 150kg
- Safety arm and locking pin ensures bucket stays in position when raised
- Spring-loaded latch for additional safety
- Designed for use with Power-Sprays Mixing Buckets and Bucket Trolleys
- Compatible with all Power-Sprays GRC Spray Stations
Also in The Range
Convenient transport from mixer to mould or spray station without the need for additional moving equipment
