PS2000 Multi Purpose Pump Spray Unit

A large, high output machine.


The PS2000 Multi Purpose Pump Spray Unit can be used for the application of thin renders and a version suitable for the low volume GFRC / GFRC production is also available.

Materials Tested by Power-Sprays:

  1. PAINTS
    All types of exterior paints similar to Sandtex etc. Eglington Stone andTrustone, Blue Circle Snowcem, Colorend,
    Wickes textured coatings, other fluid (or semi – fluid, creamy consistency) polymerised water based paints, all
    emulsion paints.
  2. PLASTERS
    Spray – grade plasters, casting plasters (retarded as required), Artex , Audex G accoustic textured coating,
    Symdex (Mandoval Coatings Ltd)
  3. CMS POZAMENT/THORO coatings
    ANODE 60 cathodic protection (due to fibrous nature use large-bore eg MK5A premix spraygun), Thoroseal
    waterproofer, Structurite HB lightweight repair compound, FX 100 (requires minimum airmix nozzle set),
    Thorolastic anticarbonation coatings (requires paint gun), Pointing grouts including ‘anti-washout’ fast setting
    Pozament PPM40 WQS, Void-filling ‘Archfil 7’ (hopper vibrator needed)
  4. LIQUID PLASTICS / FLEXCRETE coatings
    Flexcrete 851, Cemprotec E – Floor, 844SP, Cemprotec E942 (MAM Nozzle for best finish), Cemprotec Elastic,
    Flexipoint SP
  5. FEB
    Masterflow 928, Masterseal 525 polymer modified flexible waterproofing (similar to Fosroc CM 210). These require
    good atomisation for thin coat finish using 4-6mm nozzle and relatively high air pressure through LW or ST1
    spraygun. Also pump placement of Masterflow 885 (steel filled bedding grout).
  6. FOSROC
    CM210 (caution – use 8mm MAM nozzle setup on spray gun to prevent blockages in hot weather), Cemtop CP12
    self levelling waterproofer floor screed
  7. HELIFIX
    Helibond MM2
  8. VANDEX UK Ltd
    Vandex Super Reactive waterproofer, BB75 needs vibrator to ensure flow Similar to Thoroseal, BB75E needs
    vibrator to ensure flow, Thoro FX 100 (Requires MAM minimum airmix nozzle)
  9. KILWAUGHTER
    K-Rend Spray Rend
  10. FULL STOP TECHNOLOGIES
    Xypex concentrate waterproofer, Xypex modified waterproofer
    SIKA
    Sikatop 107 (Similar to Flexcrete 851) Sikatop 121, 122,122HB, Sikatop Seal 107, Monotop 610, 612*, 615,
    620**, Monolevel RM. Monomix WS (caution – quick gelling fibrous material for soffits). Pumpable screeds and
    grouts
    *612 contains a coarse aggregate. **620 is very abrasive and needs hardened nozzles replaced frequently if
    sprayed at high pressure. These products also tested by Sika
  11. S.B.D.Coatings
    SBD Motex VM212 structural repair concrete (fiber reinforced) Use 14mm nozzle on P/M gun and preferably a
    rubber lined hose, Monocouche render, Use 12-14mm nozzle on P/M gun
  12. RONACRETE
    Cellmix, Cellmix F high integrity renders for prison walling
  13. TECROC
    Easipoint (pressure pointing material Mortar 116)
  14. OTHER MATERIALS
    GFRC Slurry (glassfiber reinforced concrete) with special air panel and GFRC spray head., Pumpable sand/cement
    mixes with 1-1.5mm graded sand and high cement content 2:1 max. Alternatively leaner mixes can be processed
    with an effective pumping aid in mix (eg Sikapump), Pointing Mixes (preblended) eg Flexipoint, Easipoint,
    Pozament PPM40 WQS, Water / bitumen emulsions, Cementitious grouts / expanding grouts, Epoxy grouts (solvent resistant pump stator is needed).

Related Products